Zodiac TRI CHLORINE GENERATOR Manuel d'instructions télécharger pdf (Page 11)

ACID SUPPLY LINE

ACID SUPPLY LINE:

1. Cut a suitable length of tube to reach from the acid pump on the power pack

to the acid supply source.

2. Fit one end of the tubing to the inlet of the pump. (Pump inlet is indicated by

an upward arrow on the pump casing).

3. Drill a suitable hole in the lid of the acid supply bottle, and a smaller ‘air hole’

to stop the container from crumpling.

4. Thread the other end of the tubing through the lid of the acid supply and

attach the ceramic weight and ﬁ tting.

5. Carefully ﬁ ll the acid container with a suitable acid. Zodiac recommends

Hydrochloric acid. (Do not dilute pool acid).

WARNING:

When handling acid always use appropriate safety equipment.

6. Now place the tubing with the. weight into the acid container and screw

the lid back down ﬁ rmly.

7. Replace the acid pump cover.

8. Ensure ALL connections are secure and that all connections are ﬁ rmly

secured in their couplings.

PLEASE NOTE: Store your acid in a secure location away from any hazards.

DO NOT store the acid container in the ﬁ ltration shed unless there is adequate

ventilation as the fumes will corrode any items in the shed - including your pool

care equipment.

DO NOT store the acid container directly under or near the TRi power pack.

Failing to comply with this could void your warranty.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Pas de commentaire

Zodiac TRI CHLORINE GENERATOR Manuel d'instructions Page 11